No real substantial update this time, but I wanted to share some photos of the entire bag finally all stitched up. The top edges haven't been finished yet, the top flap needs some work, and a few spots on the sides need to be reinforced and tightened up, but hey, it's starting to look like a saddle bag finally!
Previously:
I've finally had some time in the evenings again to work on this project, but I haven't made a lot of progress. I have one side fully stitched in now, which means the bag is finally taking its proper shape. I ended up getting most of the other side done before I realized it wasn't going together very well (the seam was kind of loose), so I took it out and started over. I'm mostly finished with the second side now too, I just need to stitch up the front edge.
I'm still using a simple back stitch, which seems to be working fine. To sew the sides in, I ended up going with a small curved upholstery needle. Since I'm basically sewing from inside the bag, I find that this needle is really quite necessary.
My earlier suspicions that I somehow made the top flap too short have been confirmed. I'm trying to decide just how I'm going to fix the problem. I think I will probably just try to extend the side flaps (which have yet to make an appearance) around the front, but I'm not sure if I can do that in one piece, or if I should use a separate piece.
Previously:
Making a Saddle Bag, Part II
Making a Saddle Bag, Part I
Can I Make My Own Saddle Bag?
I know a lot of you are anxious to see how my saddle bag turns out, so I wanted to let you know that my project is temporarily on hold until our current very warm weather passes. About the last thing I want to do of an evening is sit with a heap of wool on my lap. I think it's supposed to be cooler in the next few days, so I'll probably get back to it soon. Never fear.
Boy, I had no idea so many people would be interested in my inept efforts to put a saddle bag together! Things are going slowly, but so far, so good. All I've done since my last post is cut and position the four plastic panels (cut from two cheap three-ring binders) that will form the front, bottom, back, and top of the bag. The sides, with their own plastic panels, will be what actually gives the bag its shape.
In the photo below, I've just pinned the panels into place, but last night I got two panels fully stitched in. I'm using what my wife tells me is a backstitch, which she showed me how to do. I started off pretty slow, but by the end of the evening, I was getting much faster and more confident with my stitches. Once the panels are all sewn in and all the pins are removed, the bag will finally start to take shape as I begin the process of attaching the side panels to the body of the bag.
Previously:
Making a Saddle Bag, Part I
Can I Make My Own Saddle Bag?
Here we go. The first thing I did (this was weeks ago) was to take some rough measurements of the original bag (I'll post them in a wrap-up post at the end of the series) and translated that into a paper mock-up. Why did I do this? I'm a visual learner, that's why. I needed to know that this was possible, physically in space. Whatever, that's how I think.
Then, after I picked out some fabric, I disassembled my paper mock-up and laid the pieces out on the fabric to cut out the pattern. I cut approximately a 1" seam allowance around each piece. I'm double-layering the bag, so I did two cut-outs for each piece seen below. The small pieces that would have been the side flaps for the top have not been cut out yet, but I'll come back to that later.
At this point, I decided that I was going to need to incorporate some sort of stiffening material, since the wool itself was too floppy. I decided on the flexible plastic cover of a small three-ring binder, cut to fit. I am stitching this stiffener between the layers of wool on the two side panels as well as the front, bottom, back, and top flap of the bag.
Below, I've sewn the stiffener into the two side panels and then pinned the side panels to the piece of fabric that forms the front, bottom, back, and top flap. I did this so that I could get an idea of what size I need to cut the rest of the stiffener panels. I'll do four separate panels: front, bottom, back, and top flap (although I may just triple-layer the top flap so it's not too stiff). In the photo below, I've stuffed the bag with napkins to give it some shape.
What I discovered in the process is that the top flap seems to be a bit too short. I think to fix this, I'll cut one single piece that will be sewn to the top flap, and that will run around the sides and front and overhang just a bit. If that's not clear, I think it will be later on. Anyway, so far, so good.
Previously: Can I Make My Own Saddle Bag?
I have no idea, but I'm going to try.
This ratty old nylon saddle bag came with my 1955 Huffy Sportsman and was probably originally supplied along with the Huffy's Taiwan-made saddle to appeal to American consumers who wanted the look of an English 3-speed without the cost, or who perhaps just didn't know any better.
Being the thrifty fellow that I am, I just cannot bring myself to hand over $100-$130 for an imitation leather saddle bag made by Brooks, and even less willing to pay almost $400 for a real leather one. And the bags at Velo-Orange and other places, while perfectly lovely in their own right, are just not what I'm looking for.
I'm using the old bag to create a pattern, and I've already made a mock-up out of paper. Over the weekend, I bought a yard of a nice, tweedy-looking wool remnant at the fabric store ($3.98) and I'll track down some leather and buckles to make straps.
I will disclose readily that I have zero sewing ability, although I have had some experience bodging together split seams and popped buttons. I will be trying to do this completely by hand, without mechanical aid. We'll see what happens.
